You may also want to switch the tool out of pen mode try holding the blade ( to the right of the moving cartridge)in place with your fingers and twisting the top of it to tighten the blade and twisting the knob on the side of the blade to hold it in place better. THERE IS NO REASON FOR IT TO BE SET TO 23! If it is not cutting well enough at 15-17. 15 is a good pressure for the vinyl we have now.The knife should not cut through the paper backing! A little scratching is OK, but if it's leaving holes in the paper you've got the pressure set too high.

You can save unused vinyl for future use or place it with other scraps on the shelf to the right of the vinyl cutter for others to use. Put your money in a black envelope on top of the safe by the front door and then drop the envelope into the safe.

The vinyl use costs is $1 per linear foot of vinyl used (even if you don't use all of the vinyl in the piece you pay for.) The linear foot is measured from the edge of the vinyl towards the wall.

Vinyl Cutter 101 page teaches how to create and prepare your files.

Bring files to this workstation on a jump drive.

has computer workstation already hooked up to cutter.

Located in main room next to bunker doorway.

How to use inkscape to cut vinyl